> Write a compact Python function that parses a unified diff and returns the changed file paths. Then explain two edge cases.
> Each benchmark generated about 128 tokens.
Generating 128 tokens is probably not enough for good benchmark results. MTP speedup depends on how often the predicted tokens are accepted. In my experience, the very early output has a higher acceptance rate, so short testing can give false positive speedups.
llama.cpp includes a tool specifically for benchmarking that will sweep the arguments for you so you don't have to restart the server and send it prompts:
EDIT: Also the section about downloading the models should have mentioned that llama.cpp has a "-hf" argument that will download the models for you. I appreciate the author for sharing their experience, but for beginners this might not be the best guide to use.
> I appreciate the author for sharing their experience, but for beginners this might not be the best guide to use.
Yeah, I didn't write this as a proper developer guide. My screen recording started getting loads of favourites and I started getting messages asking about how I set it up, so just through up a quick rundown of how I setup this test.
I little just saw the Unclothe announcement about "Double the speed" and thought "Ha. I wonder if that will get it fast enough I'd actually be prepared to use it" and had a go at setting it up.
I'd done tests before last year with things like Devstral, but they were always both so slow and dumb, I didn't want to bother.
This finally hit the "wow, this is useable" level of both speed and intelligence.
Realistically, you need to experiment with any user prompt + a good amount of system prompt (at least > 1000 tokens, but realistically, in the range of 3000 tokens probably good).
llama.cpp includes tools for that, what you are looking at is to have a prefill before token generation to measure it properly. Increasingly also, measuring token generation speed at longer context (32k or 64k) is important too.
I thought the same thing when I started using locals, but the reality is that - for a given context depth - the token generation speed doesn't change whether it's 128 or 8000, it just lengthens the benchmark run time.
This is akin to saying “it runs on my machine” without actually examining the problem. Sad. You’re absolutely right that 128 tokens is nothing, it’s a little more than a hello response.
As for oprncode, doesn't the system prompt eat too much of the context? Local models are really constraint in regards contex, and opencode AFAIR uses a 10k of it or some thing close.
yes, whether for home experiments or at work, it is good practice (good hygiene) to be able to swap out both agentic harnesses and models. It is important to have a good strategy for exporting skills, etc.
Not sure you really need huggingface-cli to download anything if you're just using llama.cpp. You can pass `-hf ...` and it will download the models for you. Set `LLAMA_CACHE` to change where the downloads go:
is also pretty useful if you're doing this just to try agentic coding and you're not processing images/voice. Stops it downloading the multimodal projector.
I have used omlx.ai with great success to both download multiple mlx models (including gemma and qwen) suited for my hardware AND to be able to automagically launch both open-source and close-source (claude code, codex) harnesses using these models. All from a web or desktop UI
You would not need to follow a blog post with omlx IMHO
This is useful. I'm still tinkering with Multipass VMs because I need the whole VM environment anyway and I'm on Sequoia. But I'd be interested if you did anything like that with Apple's container CLI instead; sooner or later I will have to upgrade to Tahoe because I want to play with the container CLI (and apfel).
MLX in the forms I have tried (LM Studio, oMLX) with the models I have tried (Gemma and Qwen) have both been apparently slower, yes.
I have not done in-depth, really controlled testing and there is much about performance tuning I don't understand, but it's fairly clear to me that on an M1 Max, MLX does not have the massive advantage it may have on other machines or other models.
It is wholly possible that MLX is _much_ better on the M3 and up, because the neural engine is that much better.
Frankly I think llama.cpp may simply have caught up quite a lot.
MTP is the same issue. There is always a chance that adding a separate MTP draft model has more compute overhead than it brings in terms of speedup, and since I am using an older machine and the MoE models, I am not actually in a zone where MTP can actually add much. What happens is that there's an enormous advantage in speed handling while the prompt and the early reasoning and it then tails off dramatically to be worse, on average, than non MTP.
(Qwen 3.5 35B shows, possibly, a small advantage if its internal MTP is enabled. But it is small — 10% maybe.)
For the 26B Gemma 4, MLX and MTP combined were noticeably slower than the GGUF is with llama.cpp.
If it were a newer machine with a larger, dense model, I'd definitely expect to see an advantage from MTP, and it is possible that there are some parameters I can tweak (duplicate token penalty, temperature, shared cache stuff) that give MTP more of an edge (keep its successful prediction rate higher).
Either way, it feels like the smallish gain I will see on this particular bit of kit might not be worth the long, long journey down that rabbit hole right now.
I also have an M1 Max 64GB: Qwen 3.6 benefits from MTP (after rounds of parameter optimization). MLX was unstable (haven't tried it recently), faster at TG but slower at PP, so inconclusive.
Yeah. I have not really tinkered much with parameter optimisation for the 35B model with MTP. Would be interested to see what you've found.
I'm using the GGUF too; it appears slightly faster in llama.cpp now than current LM Studio but it's not clear to me if that is down to LM Studio having a little more code overhead, older llama.cpp under the hood, or just parameter differences.
It truly is the SOTA for local inference on mac. Even when there are regressions the dev(s) are insanely responsive. It is the most impressive opensource project I've seen in a awhile
Omlx needs to incorporate macos native shortcuts use - macos can almost instantly extract text from pdfs and a bunch of other things using it's ane neural engine keeping unified ram for llm use. The two together would be awesome
I've been quite impressed with DeepSeek v4 Flash running via antirez's ds4[0].
It feels like a GPT-4 class model in terms of "stored knowledge" but is better at long-horizon tool calling than any of the GPT-4 class models.
Running on a 128GB MBP M4 Max, I'm getting ~24 t/s on generation and ~200 t/s on prefill. I was expecting it to feel slow, and it certainly does when e.g. generating code, but it's surprisingly useful as a "machine orchestrator" for simple tasks.
For non-agentic usecases, it's a decent enough model to converse with, and has the benefit of being entirely self-contained/private.
For high Ram (unified), and relatively middling to lowish Tflops and bandwidth GB/s, usually MoEs are most hopeful. The current top-1 in the (iq, tok/s, @ context depth) ranks for me (M2 Max, 96gb) is DeepSeek-V4-Flash REAP25 <65gb gguf + ds4-server + pi agent. Not better than cloud API ofc, but useful enough to endure if I need to. E.g on a non-Internet 4h flight the battery (local llm draws 60w) held long enough. REAP supporting ds4 branch here
Useful stuff in here that I wish I'd seen a few days ago :-)
I am not convinced that the MTP setup for the QAT model adds very much in terms of speed on my M1 Max, but it is definitely worth experimenting with.
Fiddling about with local models has done so much for my conceptual understanding of what is going on.
FWIW and YMMV but I also found the Gemma 4 MTP head was occasionally breaking markup in Opencode, causing the thinking to display untidily and ultimately in some cases missing the stop token. So I've stopped using MTP there for now.
Recent Qwen 3.6 models have developer role support so it will occasionally surprise you with a structured multiple choice questionnaire.
And the upsides of using draft models for MOE models with so low number of active parameters (as here or as in the article) are quite low, compared to dense models where you can get enormous speedups. I would prefer running the dense 27b models with speculative decoding instead.
Use the 27b, it's better in every way once you add MTP (which speeds up dense models but often doesn't add any performance to MoE models like the 35b-a3b). I get around 100TK/s on my 2x 3090 machine and 85 on my M5 Max.
Yeah. I think it might speed up time to first token but I am not sure how much that matters.
I do enjoy their different personalities when they are tackling "explain this" type puzzles, though.
Gemma writes so well — like a concise code blogger. It makes you understand that the thing we hate about AI slop writing is specifically the cheesy, marketingese sycophantic ChatGPT tone. It's a choice to sound that way.
Qwen writes more tersely by default, like much english language documentation in Chinese open source projects. A couple of lines, code example, fact, code example, line of blurb.
I use this prompt every now and then with a new model. It's obviously a classic SQL puzzle but I've asked new web developers this in the past (prompted by discovering that a client's subcontractor didn't understand it and was therefore unable to migrate some code from relying on dodgy pre-MySQL 5.x behaviours)
—
I have a MySQL 5 table like this: [id, label, category, score]. It contains a list of items in different categories (text names like cat1, cat2, cat3) with a numerical score. Is there a way I can write a SQL query to find the item in each category that has the highest score, without using a subquery? No two entries in any category share a score.
—
I enjoy seeing what it deduces from the subtext.
Without "thinking" mode on, they always initially fail and you need to prompt them to find the answer. With thinking mode, they both produce really nice explanations.
For me, as an old freelancer who is pretty cynical about vibe coding or "agentic engineering", what I really want is an AI tool that can help me start to solve problems and help me find the right terminology or generate some boilerplate I can tinker with. Both of these models do fine at the kind of "starter" writing that I want when I am trying to untangle an idea.
when I started using QAT recently, I stopped trying to improve my configuration after that. I will try tuning my local environment again in a few months, but with QAT things are good enough for now.
I'm not Googling much of anything anymore. 9/10 times the information is awful, it's hard to parse out of whatever other spam it's surrounded by. Meanwhile, Claude will just do the thing one-shot or with a tiny bit of refinement.
The gateway to knowledge and getting stuff done is the LLM.
Google Search is a dinosaur.
It feels like we're living a century into the future. Not even smartphones were this cool.
For what it's worth, even this reply reads like LLM output. It's not "quote describing the scenario", it's "some other linked-in-coded plot twist". If you're the average of the people you spend the most time around, and you spend the most time around a chatbot, do you start to absorb its speech patterns and logic structures?
As one famous agent said: “I say your civilization because as soon as we started thinking for you it really became our civilization which is of course what this is all about.”
An argument can be as old as the search engine and hold real value. There are ways in which unreflective search engine use has misled and mistrained people.
There’s always been argument to be had about how we manage and offload attention, what we gain and what we lose when resistance is reduced. It’s part of reflection that’s been necessary in order to make progress solid ground, and is more necessary with non-deterministic tech.
The phrase “Tactical tornados” may be older than web search and describes people who also got a lot done.
Models can be incredibly helpful boosters and situationally effective subordinates… and also patchy as a real engineering IC or org.
The argument was correct then (Google/social did make us more stupid) and correct now regarding AI. So not sure why pointing out it was said before is relevant. Except as an example of its prescience.
>"Claude, be my subordinate and get this done for me"
Since "this" is thinking, then the two formulations are equivalent.
>Instead of complaining on the sidelines, I'm getting a shit ton of work done.
Until you no longer have a job and are drowned in slop.
I cannot wait until a time in the future when we have local models that are Opus 4.6+ level, and capable of running on inexpensive hardware like a 16Gb Mac. Hopefully that's only a few years away.
It’s relatively simple to use llama.cpp/server to spin up a local LLM to work with Claude Code or Codex-CLI. The required llama server settings are often scattered all over so I maintain a set of instructions here for several popular open LLMs:
Do you use that as a daily driver? Claude Code' prompt is huge and causes you to spend a long, long time on prompt processing for local models, then running out of context shortly after.
Yes CC prompt can be ~30K tokens. I definitely do not use this as a daily driver. I did use it a few times for sensitive document work with Qwen3.6 MOE.
If you're seeking the kind of hands-off claude experience, obviously not. They are slow.
If you want to learn how these things work, train them locally, tinker, play with the code, grasp the fundamentals, or just out of sheer bloody-mindedness and principle refuse to tether the functioning of your application to a cloud API...
I have the same processor and ram. The dense 30b ish Gemma/Qwen really don't break 10 TPS with or without MTP. MOE's in this range feel more usable if they are smart enough for your work. Probably would still use hosted versions of these over local unless. MOE's feel somewhere between sonnet 3.5 and 3.7 to me. Dense feels between sonnet 3.7 and 4 in basic coding or local agentic capabilities (not close to those in chat or world knowledge)
From an economical point of view, there's almost no point to using these locally running models. The only things they are good for would be dirt cheap using the smaller/older models via some API as well. Recovering the investment for the hundreds/thousands you spend extra on hardware easily funds a lot of that. Unless you are using this stuff at scale, it's probably not going to be worth it.
I've dabbled with Qwen 3.x and Gemma 4 models a bit. They are alright but not that impressive. And my mac gets super hot if I use them for extended periods of time. It's just not very nice to use locally.
Some of these models will be a bit of a squeeze at Q4_0 I suspect; almost certainly they will be using CPU. Probably the 31B Gemma will be too much. Maybe not the Gemma-4 26B QAT.
But if you just want to play around rather than code, you really might find the Gemma 4 12B model worth mucking about with just so you've gone through the steps. Especially if you want to muck about with image analysis or audio transcription.
If you're writing PHP I think you could even find it good enough. I've been modestly surprised. You can do that basic fiddling with the Edge AI Gallery app, which can enable thinking and has a customisable system prompt and some agent support.
You could also try the 14B Deepseek R1.
Honestly even if it is not good enough, if you are anything like me, I think you'll find that going through this process is really quite educational — it has made a lot of things more concrete for me in a way that I have found reassuring and valuable.
think of local models as "zero sugar" models and that's where we're at right now. I think it's crazy how good these models are compared to last year's frontier models
I'm running an M3 on an Air with just 16GB. I can still get useful results without an internet connection in "chat mode". It's a different experience than using Claude, for sure, but it's workable. I typically use the Qwen variants these days.
This might be useful when ‘coding in chat mode’: I have a few scripts that I run in a project directory that takes a prompt from me, and creates a single long one-shot prompt that I can paste into a chat window and ask that any generating code is inside markdown code blocks for easier copy/pasting. Also, pardon the plug, but you can read my new tiny book free online that documents my experiences using agentic coding on my 16G Mac and my 32G Mac: https://leanpub.com/read/local-coding-agents
People are using 3090 (24GB) to run models, and it is the most cost effective way to run the. Yes, it is 2x faster, but memory wise you surely can spend 24gb on llm.
Also there are smaller, still usefull models that can run on 8GB or less.
M4 24GB here. You'll be fine, if you're anything like me minor latency is acceptable to obtain (a) privacy (b) reliability (c) CI/CD/guardrails (d) network independence (e) future-proofing vs. AIaaS. https://omlx.ai/ gives you intelligent local hardware based model download recommendations. That said it probably depends heavily on your workload, process and polish expectations. See also https://news.ycombinator.com/item?id=48089091
what are you using on yours? I've got a M4 Pro 24GB also. tried the open source gpt one. it's alright but I found it can get stuck at times. maybe just my config in LM Studio.
pi + Qwen3-4B-Instruct-2507 / Qwen3.6-35B-A3B-4bit / Qwen3.6-40B-Claude-4.6-Opus-Deckard-Heretic-Uncensored-Thinking-4.5bit-msq depending how seat-of-pants I want to fly on memory.
I wonder if these local model could really solve problems especially for users that aren’t experts on a given coding language. I am not sure that, more than inline auto completion and unit implementation, are these model capable of designing and composing tech specs that really work.
One way or another local AI is the future. I actually find weaker models more interesting because it keeps me sharp (at the cost of velocity of course).
I run something very similar except for directly using pi as the agentic harness I use little-coder that wraps pi with reasonable defaults for running local models. Even though my local setup is a bit slow, it is a thrill to do real work completely locally.
This video is realtime. And shows the agent responding at a perfectly usable speed.
Alas, this video appears not have been linked to the text that describes it. Perhaps I should ask an AI to generate an artistic rendering of the author's description.
The video is stuck in an `<img>` tag so you need to wait for it to load. On a slow connection it might just not show for a while. Though the video is only 1MB so should load in if you wait.
I have >400MiB/s on this machine and had already spent several minutes reading through the explanation/instructions before scrolling back to the top; it just never loads for me. I had to manually open the link in another tab, for whatever reason.
My biggest pet peeve with all these articles on local AI is the only thing they talk about is tokens per second. No one mentions the quality of the answers. No one. I don't mind waiting a little longer if the quality is better. Quickly serving me slop doesn't make it more useful. Are people really only looking at tokens per second?
The model already has its own quality benchmarks elsewhere. The article is just about running the model on X hardware, so the remaining question is then how fast it is. Or does the output quality somehow depend on the hardware too?
Local model as such will give you "autocomplete on steroids" but it is not going to run away and implement cross project feature like frontier model in let's say Cursor.
So there is no value in testing quality of answers, but there is value in testing token speed.
Is autocomplete using LLMs really useful? Even with frontier models I found it to be about 50% right, I turned it of and prefer to use IntelliJ built-in, it is way more reliable.
For me local models is all about quality, and how to achieve that - e.g. by providing guardrails that test the job done.
That's fair. There are even many dimensions to define 'quality' which include use case (coding? writing? multimedia?) and prompt. I suppose if you ask testers to provide benchmarks with their analysis, that might hamper their desire to share.
oMLX (https://github.com/jundot/omlx) makes running the mlx inference server quite easy for those interested in UI-based hosting. oMLX also supports mtp or dflash drafting.
Agreed (not sure what you mean by UI-based hosting).
oMLX does the caching I need to fit models that are near gross memory, and it handles most of the work in finding usable models. After cobbling together various solutions over months, I now just use oMLX, often from Xcode. I can tell the difference between Gemma-4 (local/free) and Claude (paid) only on the largest tasks.
I do a lot of fine tuning and development with small models themselves (not just using an LLM over a HTTP API). So downloading the models directly and running them from the CLI was natural for me, so that's what I reached for when I wanted to play around with this.
I poured a couple days into custom Burn inference for Qwen3-Coder-Next only to find it doesn't come with a speculative decoder, so on my M4 Max I can't push it much further than 120t/s. That's still kinda slow, though still faster than llama.cpp's 70.9t/s and MLX's 80.6t/s with the same model. Claude Fable 5 is recommending I use the Qwen3 MTP -- I worry that will compromise the quality somewhat, but might give it a try to see if I can get more usable speeds.
That was exactly my same question. Then I finished reading the post. The reason is pretty clear, and written in the post: it is faster than ollama+mlx.
I was benchmarking different models, different engines, and different draft models, I posted a video on twitter, and people started asking about the setup in the final screen recording. So the blog post isn't so much "how a beginner should setup something" it's "here's the setup I posted in the video".
> The benchmark prompt was:
> Write a compact Python function that parses a unified diff and returns the changed file paths. Then explain two edge cases.
> Each benchmark generated about 128 tokens.
Generating 128 tokens is probably not enough for good benchmark results. MTP speedup depends on how often the predicted tokens are accepted. In my experience, the very early output has a higher acceptance rate, so short testing can give false positive speedups.
llama.cpp includes a tool specifically for benchmarking that will sweep the arguments for you so you don't have to restart the server and send it prompts:
https://github.com/ggml-org/llama.cpp/blob/master/tools/llam...
EDIT: Also the section about downloading the models should have mentioned that llama.cpp has a "-hf" argument that will download the models for you. I appreciate the author for sharing their experience, but for beginners this might not be the best guide to use.
> I appreciate the author for sharing their experience, but for beginners this might not be the best guide to use.
Yeah, I didn't write this as a proper developer guide. My screen recording started getting loads of favourites and I started getting messages asking about how I set it up, so just through up a quick rundown of how I setup this test.
I little just saw the Unclothe announcement about "Double the speed" and thought "Ha. I wonder if that will get it fast enough I'd actually be prepared to use it" and had a go at setting it up.
I'd done tests before last year with things like Devstral, but they were always both so slow and dumb, I didn't want to bother.
This finally hit the "wow, this is useable" level of both speed and intelligence.
I wasn't familiar with Unclothe, so I had to look it up..
Are you sure you did not mean Unsloth?
They likely did, and this autocorrect slip might suggest why OP is using local models :)
Indeed, a clear Freudian slip. The one where you say one thing, but you mean your mother.
Realistically, you need to experiment with any user prompt + a good amount of system prompt (at least > 1000 tokens, but realistically, in the range of 3000 tokens probably good).
llama.cpp includes tools for that, what you are looking at is to have a prefill before token generation to measure it properly. Increasingly also, measuring token generation speed at longer context (32k or 64k) is important too.
At 128 tokens, you’re benchmarking the overture, not the opera.
I thought the same thing when I started using locals, but the reality is that - for a given context depth - the token generation speed doesn't change whether it's 128 or 8000, it just lengthens the benchmark run time.
This is akin to saying “it runs on my machine” without actually examining the problem. Sad. You’re absolutely right that 128 tokens is nothing, it’s a little more than a hello response.
I wrote a similar post some time ago just used ollama and opencode https://blog.kulman.sk/running-local-llm-coding-server/
Ollama is not a good choice - https://sleepingrobots.com/dreams/stop-using-ollama/
As for oprncode, doesn't the system prompt eat too much of the context? Local models are really constraint in regards contex, and opencode AFAIR uses a 10k of it or some thing close.
this is the way, given anyone could swap for oh my pi / pi / etc
yes, whether for home experiments or at work, it is good practice (good hygiene) to be able to swap out both agentic harnesses and models. It is important to have a good strategy for exporting skills, etc.
actually useful and the ollama gui could probably even simplify this more.
Not sure you really need huggingface-cli to download anything if you're just using llama.cpp. You can pass `-hf ...` and it will download the models for you. Set `LLAMA_CACHE` to change where the downloads go:
Yes.
-hfd for the draft model.
Nice, was wondering if there was a flag for the draft as well.
Not knocking huggingface-cli, just find it's much easier for people to try out this stuff when they can just
I have used omlx.ai with great success to both download multiple mlx models (including gemma and qwen) suited for my hardware AND to be able to automagically launch both open-source and close-source (claude code, codex) harnesses using these models. All from a web or desktop UI
You would not need to follow a blog post with omlx IMHO
In case anyone is looking for a sandbox to go with oMLX and Pi: https://github.com/Dotnaught/pi-sandbox
This is useful. I'm still tinkering with Multipass VMs because I need the whole VM environment anyway and I'm on Sequoia. But I'd be interested if you did anything like that with Apple's container CLI instead; sooner or later I will have to upgrade to Tahoe because I want to play with the container CLI (and apfel).
it looks handy but ...
just so the single pi sandbox can talk to localhost? ... this gives me some grave doubts about the rest of it being set up well.FWIW I have not, on a 64GB M1 Max, seen any advantage from oMLX specifically or MLX generally over GGUF with llama.cpp.
The Gemma 4 MLX builds I have found so far have been slower at the same quantisation and much slower with MTP.
The built-in web UI for llama.cpp is really quite good once you have chosen your model. Otherwise I quite like LM Studio for tinkering.
One thing I would say is that both Gemma-4 and Qwen 3.6 simply do not need a large chunk of the typical opencode system prompt. Better off without it.
what? you're saying both MLX and MTP have been slower for your mac?
MLX in the forms I have tried (LM Studio, oMLX) with the models I have tried (Gemma and Qwen) have both been apparently slower, yes.
I have not done in-depth, really controlled testing and there is much about performance tuning I don't understand, but it's fairly clear to me that on an M1 Max, MLX does not have the massive advantage it may have on other machines or other models.
It is wholly possible that MLX is _much_ better on the M3 and up, because the neural engine is that much better.
Frankly I think llama.cpp may simply have caught up quite a lot.
MTP is the same issue. There is always a chance that adding a separate MTP draft model has more compute overhead than it brings in terms of speedup, and since I am using an older machine and the MoE models, I am not actually in a zone where MTP can actually add much. What happens is that there's an enormous advantage in speed handling while the prompt and the early reasoning and it then tails off dramatically to be worse, on average, than non MTP.
(Qwen 3.5 35B shows, possibly, a small advantage if its internal MTP is enabled. But it is small — 10% maybe.)
For the 26B Gemma 4, MLX and MTP combined were noticeably slower than the GGUF is with llama.cpp.
If it were a newer machine with a larger, dense model, I'd definitely expect to see an advantage from MTP, and it is possible that there are some parameters I can tweak (duplicate token penalty, temperature, shared cache stuff) that give MTP more of an edge (keep its successful prediction rate higher).
Either way, it feels like the smallish gain I will see on this particular bit of kit might not be worth the long, long journey down that rabbit hole right now.
I also have an M1 Max 64GB: Qwen 3.6 benefits from MTP (after rounds of parameter optimization). MLX was unstable (haven't tried it recently), faster at TG but slower at PP, so inconclusive.
Yeah. I have not really tinkered much with parameter optimisation for the 35B model with MTP. Would be interested to see what you've found.
I'm using the GGUF too; it appears slightly faster in llama.cpp now than current LM Studio but it's not clear to me if that is down to LM Studio having a little more code overhead, older llama.cpp under the hood, or just parameter differences.
It truly is the SOTA for local inference on mac. Even when there are regressions the dev(s) are insanely responsive. It is the most impressive opensource project I've seen in a awhile
Omlx needs to incorporate macos native shortcuts use - macos can almost instantly extract text from pdfs and a bunch of other things using it's ane neural engine keeping unified ram for llm use. The two together would be awesome
I've been quite impressed with DeepSeek v4 Flash running via antirez's ds4[0].
It feels like a GPT-4 class model in terms of "stored knowledge" but is better at long-horizon tool calling than any of the GPT-4 class models.
Running on a 128GB MBP M4 Max, I'm getting ~24 t/s on generation and ~200 t/s on prefill. I was expecting it to feel slow, and it certainly does when e.g. generating code, but it's surprisingly useful as a "machine orchestrator" for simple tasks.
For non-agentic usecases, it's a decent enough model to converse with, and has the benefit of being entirely self-contained/private.
[0]https://github.com/antirez/ds4
For high Ram (unified), and relatively middling to lowish Tflops and bandwidth GB/s, usually MoEs are most hopeful. The current top-1 in the (iq, tok/s, @ context depth) ranks for me (M2 Max, 96gb) is DeepSeek-V4-Flash REAP25 <65gb gguf + ds4-server + pi agent. Not better than cloud API ofc, but useful enough to endure if I need to. E.g on a non-Internet 4h flight the battery (local llm draws 60w) held long enough. REAP supporting ds4 branch here
https://github.com/ljubomirj/ds4/tree/reap-compact-support
DS4F dropping to unusable <10 tok/s only at 784K context (!!) makes a big difference.
Useful stuff in here that I wish I'd seen a few days ago :-)
I am not convinced that the MTP setup for the QAT model adds very much in terms of speed on my M1 Max, but it is definitely worth experimenting with.
Fiddling about with local models has done so much for my conceptual understanding of what is going on.
FWIW and YMMV but I also found the Gemma 4 MTP head was occasionally breaking markup in Opencode, causing the thinking to display untidily and ultimately in some cases missing the stop token. So I've stopped using MTP there for now.
Recent Qwen 3.6 models have developer role support so it will occasionally surprise you with a structured multiple choice questionnaire.
I found a marginal downside to Qwen3.6-35B-A3B-MTP vs. the non-MTP equivalent on an M1 Max. I’ll maybe experiment with settings further though.
And the upsides of using draft models for MOE models with so low number of active parameters (as here or as in the article) are quite low, compared to dense models where you can get enormous speedups. I would prefer running the dense 27b models with speculative decoding instead.
That is what I have learned, yes. Not tested the dense Qwen yet. IIRC the 31B Gemma was slow enough that I doubt MTP will help me much.
Use the 27b, it's better in every way once you add MTP (which speeds up dense models but often doesn't add any performance to MoE models like the 35b-a3b). I get around 100TK/s on my 2x 3090 machine and 85 on my M5 Max.
Thanks, I'll give it a go.
(I generally find standard 27B too slow to enjoy using, whereas 35B-A3B is pretty snappy.)
Yeah. I think it might speed up time to first token but I am not sure how much that matters.
I do enjoy their different personalities when they are tackling "explain this" type puzzles, though.
Gemma writes so well — like a concise code blogger. It makes you understand that the thing we hate about AI slop writing is specifically the cheesy, marketingese sycophantic ChatGPT tone. It's a choice to sound that way.
Qwen writes more tersely by default, like much english language documentation in Chinese open source projects. A couple of lines, code example, fact, code example, line of blurb.
I use this prompt every now and then with a new model. It's obviously a classic SQL puzzle but I've asked new web developers this in the past (prompted by discovering that a client's subcontractor didn't understand it and was therefore unable to migrate some code from relying on dodgy pre-MySQL 5.x behaviours)
—
—I enjoy seeing what it deduces from the subtext.
Without "thinking" mode on, they always initially fail and you need to prompt them to find the answer. With thinking mode, they both produce really nice explanations.
For me, as an old freelancer who is pretty cynical about vibe coding or "agentic engineering", what I really want is an AI tool that can help me start to solve problems and help me find the right terminology or generate some boilerplate I can tinker with. Both of these models do fine at the kind of "starter" writing that I want when I am trying to untangle an idea.
when I started using QAT recently, I stopped trying to improve my configuration after that. I will try tuning my local environment again in a few months, but with QAT things are good enough for now.
FYI you can open Claude code in the terminal, point it at this article and just tell it to "do it", if you're feeling extra lazy
This is the way.
I'm not Googling much of anything anymore. 9/10 times the information is awful, it's hard to parse out of whatever other spam it's surrounded by. Meanwhile, Claude will just do the thing one-shot or with a tiny bit of refinement.
The gateway to knowledge and getting stuff done is the LLM.
Google Search is a dinosaur.
It feels like we're living a century into the future. Not even smartphones were this cool.
Yeah, if the future is "Claude, think for me" I'm happy to stay at the good old present.
https://en.wikipedia.org/wiki/Is_Google_Making_Us_Stupid%3F
https://newsletter.pessimistsarchive.org/p/when-educators-mo...
New decade, same old argument.
It's not
> "Claude, think for me"
It's
> "Claude, be my subordinate and get this done for me"
Instead of complaining on the sidelines, I'm getting a shit ton of work done.
For what it's worth, even this reply reads like LLM output. It's not "quote describing the scenario", it's "some other linked-in-coded plot twist". If you're the average of the people you spend the most time around, and you spend the most time around a chatbot, do you start to absorb its speech patterns and logic structures?
Yeah, good ol' present for me too then, thanks.
As one famous agent said: “I say your civilization because as soon as we started thinking for you it really became our civilization which is of course what this is all about.”
An argument can be as old as the search engine and hold real value. There are ways in which unreflective search engine use has misled and mistrained people.
There’s always been argument to be had about how we manage and offload attention, what we gain and what we lose when resistance is reduced. It’s part of reflection that’s been necessary in order to make progress solid ground, and is more necessary with non-deterministic tech.
The phrase “Tactical tornados” may be older than web search and describes people who also got a lot done.
Models can be incredibly helpful boosters and situationally effective subordinates… and also patchy as a real engineering IC or org.
The argument was correct then (Google/social did make us more stupid) and correct now regarding AI. So not sure why pointing out it was said before is relevant. Except as an example of its prescience.
>"Claude, be my subordinate and get this done for me"
Since "this" is thinking, then the two formulations are equivalent.
>Instead of complaining on the sidelines, I'm getting a shit ton of work done.
Until you no longer have a job and are drowned in slop.
> Instead of complaining on the sidelines, I'm getting a shit ton of work done.
Nah, you are just producing a bunch of slop and hope that nobody notices.
> I'm getting a shit ton of work done.
It’s weird when people are proud of doing ton of work. Im the opposite, Im proud that Im doing minimal stuff without llms.
> I'm getting a shit ton of work done.
maybe you stopped thinking too much that you dont regonize that you are just producing slop that no one cares about.
AI is now getting humans to produce slop
Claude “respond in a friendly way that I agree with this comment”
There’s no way this is not a paid comment, I see stuff like this everywhere in HN nowadays
>It feels like we're living a century into the future.
The WALL-E chair-people future.
I cannot wait until a time in the future when we have local models that are Opus 4.6+ level, and capable of running on inexpensive hardware like a 16Gb Mac. Hopefully that's only a few years away.
It’s relatively simple to use llama.cpp/server to spin up a local LLM to work with Claude Code or Codex-CLI. The required llama server settings are often scattered all over so I maintain a set of instructions here for several popular open LLMs:
https://pchalasani.github.io/claude-code-tools/integrations/...
Do you use that as a daily driver? Claude Code' prompt is huge and causes you to spend a long, long time on prompt processing for local models, then running out of context shortly after.
Yes CC prompt can be ~30K tokens. I definitely do not use this as a daily driver. I did use it a few times for sensitive document work with Qwen3.6 MOE.
>64 GB
Thats the rub. I have an M4 with 48G. I wonder if it is worth testing this out.
My past attempts (with Ollama and various LLMs) were too slow to use.
I have a M5 MAX with 128, local models are toys compared to hosted ones. I've spent a lot of time and money trying to make it work even 1/2 as well.
It all depends on what you want to do, I guess.
If you're seeking the kind of hands-off claude experience, obviously not. They are slow.
If you want to learn how these things work, train them locally, tinker, play with the code, grasp the fundamentals, or just out of sheer bloody-mindedness and principle refuse to tether the functioning of your application to a cloud API...
I have the same processor and ram. The dense 30b ish Gemma/Qwen really don't break 10 TPS with or without MTP. MOE's in this range feel more usable if they are smart enough for your work. Probably would still use hosted versions of these over local unless. MOE's feel somewhere between sonnet 3.5 and 3.7 to me. Dense feels between sonnet 3.7 and 4 in basic coding or local agentic capabilities (not close to those in chat or world knowledge)
From an economical point of view, there's almost no point to using these locally running models. The only things they are good for would be dirt cheap using the smaller/older models via some API as well. Recovering the investment for the hundreds/thousands you spend extra on hardware easily funds a lot of that. Unless you are using this stuff at scale, it's probably not going to be worth it.
I've dabbled with Qwen 3.x and Gemma 4 models a bit. They are alright but not that impressive. And my mac gets super hot if I use them for extended periods of time. It's just not very nice to use locally.
Some of these models will be a bit of a squeeze at Q4_0 I suspect; almost certainly they will be using CPU. Probably the 31B Gemma will be too much. Maybe not the Gemma-4 26B QAT.
But if you just want to play around rather than code, you really might find the Gemma 4 12B model worth mucking about with just so you've gone through the steps. Especially if you want to muck about with image analysis or audio transcription.
If you're writing PHP I think you could even find it good enough. I've been modestly surprised. You can do that basic fiddling with the Edge AI Gallery app, which can enable thinking and has a customisable system prompt and some agent support.
You could also try the 14B Deepseek R1.
Honestly even if it is not good enough, if you are anything like me, I think you'll find that going through this process is really quite educational — it has made a lot of things more concrete for me in a way that I have found reassuring and valuable.
i’m running m4 pro 48gb right now
omlx + gemma 12b 6 bit + pi
it’s feasible for sure
MoEs for speed (qwen 35b, cohere 30b, gemma 26b)
Dense for more methodical work (qwen 27b [reigning champ], gemma 31b, gemma 12b)
MoE i recommend 5bit+
Dense i think 4 bit is okay
Play with your context size, you don’t really need that much, have lazy loading for tools and mcps
my pi extensions for anyone looking for a skinny quick setup, i have use `--no-skills` right now too:
think of local models as "zero sugar" models and that's where we're at right now. I think it's crazy how good these models are compared to last year's frontier modelsI'm running an M3 on an Air with just 16GB. I can still get useful results without an internet connection in "chat mode". It's a different experience than using Claude, for sure, but it's workable. I typically use the Qwen variants these days.
This might be useful when ‘coding in chat mode’: I have a few scripts that I run in a project directory that takes a prompt from me, and creates a single long one-shot prompt that I can paste into a chat window and ask that any generating code is inside markdown code blocks for easier copy/pasting. Also, pardon the plug, but you can read my new tiny book free online that documents my experiences using agentic coding on my 16G Mac and my 32G Mac: https://leanpub.com/read/local-coding-agents
Looks cool, I’ll checkout the book. Your download links (PDF and EPUB) are down for me.
> NoSuchKeyThe specified key does not exist…
People are using 3090 (24GB) to run models, and it is the most cost effective way to run the. Yes, it is 2x faster, but memory wise you surely can spend 24gb on llm.
Also there are smaller, still usefull models that can run on 8GB or less.
I've an M1 Pro with 32GB ram and it's running pretty well
M4 24GB here. You'll be fine, if you're anything like me minor latency is acceptable to obtain (a) privacy (b) reliability (c) CI/CD/guardrails (d) network independence (e) future-proofing vs. AIaaS. https://omlx.ai/ gives you intelligent local hardware based model download recommendations. That said it probably depends heavily on your workload, process and polish expectations. See also https://news.ycombinator.com/item?id=48089091
what are you using on yours? I've got a M4 Pro 24GB also. tried the open source gpt one. it's alright but I found it can get stuck at times. maybe just my config in LM Studio.
pi + Qwen3-4B-Instruct-2507 / Qwen3.6-35B-A3B-4bit / Qwen3.6-40B-Claude-4.6-Opus-Deckard-Heretic-Uncensored-Thinking-4.5bit-msq depending how seat-of-pants I want to fly on memory.
Why not just get Claude to set it up?
I wonder if these local model could really solve problems especially for users that aren’t experts on a given coding language. I am not sure that, more than inline auto completion and unit implementation, are these model capable of designing and composing tech specs that really work.
Here's a visual post for using LM Studio and VS Code (and Pi): https://blog.alexewerlof.com/p/local-llms-for-agentic-coding
One way or another local AI is the future. I actually find weaker models more interesting because it keeps me sharp (at the cost of velocity of course).
Nice writeup, thanks.
I run something very similar except for directly using pi as the agentic harness I use little-coder that wraps pi with reasonable defaults for running local models. Even though my local setup is a bit slow, it is a thrill to do real work completely locally.
I use LM Studio with the local server it ships and connect it to opencode. Takes 2 min to setup
This video is realtime. And shows the agent responding at a perfectly usable speed.
Alas, this video appears not have been linked to the text that describes it. Perhaps I should ask an AI to generate an artistic rendering of the author's description.
The video is stuck in an `<img>` tag so you need to wait for it to load. On a slow connection it might just not show for a while. Though the video is only 1MB so should load in if you wait.
I have >400MiB/s on this machine and had already spent several minutes reading through the explanation/instructions before scrolling back to the top; it just never loads for me. I had to manually open the link in another tab, for whatever reason.
My biggest pet peeve with all these articles on local AI is the only thing they talk about is tokens per second. No one mentions the quality of the answers. No one. I don't mind waiting a little longer if the quality is better. Quickly serving me slop doesn't make it more useful. Are people really only looking at tokens per second?
The model already has its own quality benchmarks elsewhere. The article is just about running the model on X hardware, so the remaining question is then how fast it is. Or does the output quality somehow depend on the hardware too?
The quality is obviously much worse, but still useful as a reference if you generally know what you are doing
It solve the "I'm coding on the plane and need to look up this thing I've forgotten" problem, for me at least
Local model as such will give you "autocomplete on steroids" but it is not going to run away and implement cross project feature like frontier model in let's say Cursor.
So there is no value in testing quality of answers, but there is value in testing token speed.
You just have to have correct expectations.
Is autocomplete using LLMs really useful? Even with frontier models I found it to be about 50% right, I turned it of and prefer to use IntelliJ built-in, it is way more reliable.
For me local models is all about quality, and how to achieve that - e.g. by providing guardrails that test the job done.
That's fair. There are even many dimensions to define 'quality' which include use case (coding? writing? multimedia?) and prompt. I suppose if you ask testers to provide benchmarks with their analysis, that might hamper their desire to share.
oMLX (https://github.com/jundot/omlx) makes running the mlx inference server quite easy for those interested in UI-based hosting. oMLX also supports mtp or dflash drafting.
Agreed (not sure what you mean by UI-based hosting).
oMLX does the caching I need to fit models that are near gross memory, and it handles most of the work in finding usable models. After cobbling together various solutions over months, I now just use oMLX, often from Xcode. I can tell the difference between Gemma-4 (local/free) and Claude (paid) only on the largest tasks.
Whay about of the tons of caches that just pile up until you notice that you must delete them manually?
I wonder why something like LM Studio didn't work for the author?
That’s what I was wondering, lm studio and draw things are easy to use apps that handle much of the cruft for you
I do a lot of fine tuning and development with small models themselves (not just using an LLM over a HTTP API). So downloading the models directly and running them from the CLI was natural for me, so that's what I reached for when I wanted to play around with this.
I assumed lmstudio is the obvious choice after ollama. Is there a reason lmstudio is not used widely ?
LM Studio is fine. Gorgeous actually. I've found it really helpful for understanding parameters, settings, general figuring out.
But there is an incentive not to use it if you want to write an article that uses only open-source tools, because it isn't.
Why would anyone use Ollama at all (aside from obvious reasons one can look up online) - llama.cpp used directly, without this wrapper is faster.
Basically one has two real choices for local LLMs: llama.cpp (if single user) or vLLM (if multi-user/enterprise).
Yeah I’ve also been using it on macOS, my experience is that it works better with the metal API and has better performance.
Is there a link to the video? It did not render when I went to the page. Curious about the real-time feel of this
That's the direct link: https://ikyle.me/blog/2026/how-to-setup-a-local-coding-agent...
Note this is cut to just before the model responds, so not a great way for people to judge the real-time feel of this.
The full video is on Twitter: https://x.com/Freerunnering/status/2065275403548168398
Plus a followup one where you see me type the question in and press enter (though that video is with Qwen 3.6, not Gemma 4) https://x.com/Freerunnering/status/2065354101878055038
How much RAM did the local machine have?
8b max on a std 16gb macbook. Anything more and your mac is toast
70b on my M1 max 64gb
How much did tha thing cost?
You can also install Harbor and then it's:
harbor up omlx opencode
Does anybody run a local agent on a Mac using an outboard GPU?
I run a second Mac for local llm use and access it remotely using ssh from the first mac
Has anyone compared a setup like this to just using LM Studio?
Yes, I can confirm that LM Studio works great for this.
I poured a couple days into custom Burn inference for Qwen3-Coder-Next only to find it doesn't come with a speculative decoder, so on my M4 Max I can't push it much further than 120t/s. That's still kinda slow, though still faster than llama.cpp's 70.9t/s and MLX's 80.6t/s with the same model. Claude Fable 5 is recommending I use the Qwen3 MTP -- I worry that will compromise the quality somewhat, but might give it a try to see if I can get more usable speeds.
or you can just load up ollama, have it load a local model and point claude or opencode at it...
is this article old? It's not. I'm not sure why he went through all the bother of llama.cpp
That was exactly my same question. Then I finished reading the post. The reason is pretty clear, and written in the post: it is faster than ollama+mlx.
how much faster?
I was benchmarking different models, different engines, and different draft models, I posted a video on twitter, and people started asking about the setup in the final screen recording. So the blog post isn't so much "how a beginner should setup something" it's "here's the setup I posted in the video".
Original video: https://x.com/Freerunnering/status/2065275403548168398
And in the blog post there is a table showing the different speeds I got from different engines.
Slowest combo was 38.1 tk/s, and the fastest was 72.2 tk/s. All from "the same" model.
ollama is a wrapper on top of llama.cpp, and it makes llama.cpp slower, why use it?
Also Ollama has other issues (like forgetting what it really is - a wrapper).
Grammar note:
When used as a verb, it should be "set up," and when used as a noun, "setup."
Other examples (verb, noun):
log in, login
back up, backup
shut down, shutdown
break down, breakdown
warm up, warmup